Shanghai Yichen industrial co. LTD
Add to Cart
Whatsapp: +86 13818731663
Wechart: 630531309
The PIM-1K is a very small and very compact stud welding gun (welding method: capacitor discharge (contact)) for welding cupped head pins (insulation nails with clip) to fasten insulation mats. It was specially designed (length: only 43 mm, weight: only 200g) to enable welding in difficult to access areas. The cupped head pins are put onto the chuck and pushed through the insulation mat. At a certain surface pressure the welding is automatically triggered.
The PIM-1K stands out through its simple handling, its robust construction and its high reliability. Its ergonomic design and low weight assure tireless working.
| Welding range | Ø 2-4 mm |
| Welding material | steel, stainless steel |
| Stud length | any |
| Welding method (acc. to DIN EN ISO 14555) | capacitor discharge (contact method) |
| Welding cable | 10 m, 25 mm² |
| Control cable plug | 7-pin |
| Dimensions (WxHxL) | 40x130x43 mm |
| Weight (without cable) | 0,2 kg |
| Item number | B-90-10-2119 |
→ length: only 43 mm
→ weight: only 200 g
→ for welding in difficult to access areas
very well suited for welding on problematic surfaces (e.g. zinc, tinder)
automatic triggering of welding procedure when correct surface pressure of cupped head pin to base material is reached
highest operational repeatability, high welding quality, high reliability
simple handling
high service life through high-grade mechanical components
robust housing made from impact resistant, full-insulating plastics
50 mm² welding cable plugs in order to prevent burnt contacts
precision guidance protected from welding spatters
ergonomic design
All capacitor discharge stud welding guns at a glance
| PKM-1B | PHM-1A | PIM-1B | PIM-1K | ||
| Welding method | |||||
| Capacitor discharge (contact) | x | x | x | ||
| Capacitor discharge (gap) | x | ||||
| Application range | |||||
| Threaded studs, tapped studs, non-threaded studs, insulation nails, earth plugs, double earth plugs | x | x | |||
| Cupped head pins | x | x | |||
| Welding range (Ø mm) | |||||
| Capacitor discharge (contact) | 2-10 | 2-4 | 2-4 | ||
| Capacitor discharge (gap) | 2-10 | ||||
| Welding material | |||||
| Steel | x | x | x | x | |
| Stainless steel | x | x | x | x | |
| Aluminium | x | ||||
| Brass | x | ||||
| Spring pressure adjustable | x | x | x | ||
| Spring pressure display | x | x | x | ||
| Lift adjustable | x | ||||
| Lift display | x | ||||
| Piston guide | |||||
| Slide-bearing | x | x | x | x | |
| Linear ball track | o | o | |||
| Welding cable | |||||
| -cross-section (mm2) | 25 | 25 | 25 | 25 | |
| -length (m) | 6,5 | 3 | 10 | any | |
| Control cable plug | 7-pin | 7-pin | 7-pin | 7-pin | |
| Housing from impact resistant plastics | x | x | x | x | |
| Protection of piston guidance from welding spatters | x | x | x | x | |
| Dimensions | |||||
| Width (mm) | 40 | 40 | 40 | 40 | |
| Height (mm) | 130 | 130 | 130 | 130 | |
| Length (mm) | 183 | 183 | 193 | 43 | |
| Weight without cable (kg) | 0,7 | 0,7 | 0,9 | 0.2 | |
| x = Standard, o = Option | |||||